Allied Telesis AT-S62 - Manual (Page 149)

AT-S62 Menus Interface User’s Guide
Section I: Basic Operations 149
Figure 44 is an example of the LACP (IEEE 802.3ad) Aggregator Status
menu. The information is for viewing purposes only. An aggregator
appears in the menu only if there is at least one active aggregate
trunk between the switch and another network device.
Figure 44 LACP (IEEE 802.3ad) Aggregator Status Menu
If there are no active aggregate trunks on the switch, the following
message is displayed:
No Aggregator with aggregatable Ports
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
LACP (IEEE 802.3ad) Aggregator Status
Aggregator #1 ................. Sales server
Adminkey ...................... 0x0050
Oper Key....................... 0x1405
Speed ......................... 100 Mbps
Ports in LAGID ................ 1-4
Aggregated Port ............... 1-4
Mode .......................... SRC/DST MAC
LAG ID:
[(0080,00-30-84-00-00-00,0041,00,0000),(0080,00-30-84-00-00-02,0004,00,0000)]
R - Return to Previous Menu
Enter your selection?