Allied Telesis AT-S62 - Manual (Page 148)

Chapter 8: Port Trunking
Section I: Basic Operations 148
Displaying LACP
Port or
Aggregator Status
To display LACP port or aggregator status, perform the following
procedure:
1. From the Main Menu, type 1 to select Port Configuration.
2. From the Port Configuration menu, type 4 to select Port Trunking and
LACP.
The Port Trunking and LACP menu is shown in Figure 36 on page 134.
3. Type 2 to select LACP Configuration.
The LACP (IEEE 8023ad) Configuration menu is shown in Figure 39 on
page 140.
4. To view port status, type 7 to select Show LACP Port Status. To view
aggregator status, type 8 to select Show LACP Aggregator Status.
Figure 43 is an example of the LACP (IEEE 802.3ad Port Status menu.
The information in this window is for viewing purposes only. For
definitions, refer to the IEEE 802.3ad standard.
Figure 43 LACP (IEEE 802.3ad Port Status Menu
LACP (IEEE 802.3ad) Port Status
Port ............. 01
Aggregator ....... Sales server
ACTOR PARTNER
====================================++++++++===========================
Actor Port ............. 06
Partner Port ......... 00
Selected ............... SELECTED Partner System ....... 00-30-84-00-00-02
Oper Key ............... 0x0050 Oper Key ............ 0x0004
Oper Port Priority .... 0x0006 Oper Port Priority ... 0x0007
Individual ............. NO Individual ........... NO
Synchronized............ YES Synchronized.......... YES
Collecting ............ YES Collecting ........... YES
Distributing ........... YES Distributing ......... NO
Defaulted .............. NO Defaulted ............ NO
Expired ................ NO Expired .............. NO
Actor Churn .......... YES Partner Churn ........ YES
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?