Allied Telesis AT-S62 - Manual (Page 233)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 233
Deleting a Classifier
This procedure deletes a classifier from the switch. To delete a classifier,
you need to know its ID number. To view classifier ID numbers, refer to
Displaying Classifiers on page 235.
You cannot delete a classifier if it belongs to an ACL or QoS policy. You
must first remove a classifier from its ACL and QoS policy assignments
before you can delete it.
To delete a classifier, do the following:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 1 to select Classifier
Configuration.
The Classifier Configuration menu is shown in Figure 67 on page 228.
3. From the Classifier Configuration menu, type 3 to select Destroy
Classifier.
The following prompt is displayed:
Enter Classifier ID : [1 to 9999] -> 1
4. Enter the ID number of the classifier you want to delete.
The details of the specified classifier are displayed. Use this window to
verify that you are deleting the correct classifier.
5. If this is the correct classifier, type D to select Destroy Classifier.
The classifier is deleted from the switch.
6. To delete additional classifiers, repeat this procedure starting with
step 3.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.