Allied Telesis AT-S62 - Manual (Page 47)

AT-S62 Menus Interface User’s Guide
Section I: Basic Operations 47
3. Change the enhanced stacking status of the master switch to Master.
This is explained in Setting a Switch’s Enhanced Stacking Status
on page 48.
Figure 4 is an example of the enhanced stacking feature.
Figure 4 Enhanced Stacking Example
The example consists of a network of two subnets interconnected with a
router. Two AT-8524M switches in each subnet have been selected as
the master switches of their respective subnets, and each has been
assigned a unique IP address.
To manage the switches of a subnet, you can start a local management
session or a remote Telnet management session on one of the master
switches in the subnet. You would then have management access to all
enhanced stacking switches in the same subnet.
FAU LT MASTER PWR
RS-232 TERMINAL PORT
Subnet A
Subnet B
Master 2
149.32.11.16
IP Address
Master 1
149.32.11.22
IP Address
Master 1
149.32.09.18
IP Address
Master 2
149.32.09.24
IP Address
Router