Allied Telesis AT-S62 - Manual (Page 171)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 171
5. To rename a system file, do the following:
a. From the File Operations menu, type 5 to select Rename File.
The following prompt is displayed:
Enter the source file name:
b. Enter the name of the file you want to rename.
The following prompt is displayed:
Enter the destination file name:
c. Enter the new name for the file.
You can enter a file name of up to 16 alphanumeric characters,
followed by a 3 letter extension. You must keep the same
extension.
The following message is displayed:
Please wait...
Press any key ...
d. Press any key to return to the File Operations menu.
6. To delete a system file, do the following:
a. From the File Operations menu, type 6 to select Delete File.
The following prompt is displayed:
Enter file name to be deleted:
b. Enter the name of the file you want to delete.
The following prompt is displayed:
Please wait...
Press any key ...
c. Press any key to return to the File Operations menu.
Note
Deleting the configuration file that is acting as the active boot
configuration file will cause the switch to use its default settings the
next time you reboot or power cycle the switch, unless you select
another active boot configuration file. For instructions on how to
change the active boot configuration file, see Setting the Active
Boot Configuration File on page 166.