Allied Telesis AT-S62 - Manual (Page 235)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 235
Displaying Classifiers
To display the classifiers on a switch, do the following:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 1 to select Classifier
Configuration.
The Classifier Configuration menu is shown in Figure 67 on page 228.
3. From the Classifier Configuration menu, type 4 to select Show
Classifiers.
An example of the Show Classifiers window is illustrated in Figure 70.
Figure 70 Show Classifiers Menu
The columns in the window are defined here:
❑ ID - The ID number of the classifier.
❑ Description - A description of the classifier.
❑ Number of References - The number of current assignments of a
classifier to ACLs and QoS policies. For instance, a value of 8 would
mean that a classifier is assigned to 8 ACLs and/or QoS policies.
This number includes both active and inactive ACLs and QoS
policies. An active ACL or policy is assigned to a switch port while
an inactive ACL or policy is not. If this number is 0 (zero), the
classifier has not been assigned to any ACLs or policies.
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Show Classifiers
Number of classifiers: 5
Number of Number of
ID Description References Active Associations
-----------------------------------------------------------
1
IP flow 4 3
2 Dst149.11.11.0 1 1
3 TCP flow 1 0
4 Src149.22.22.49 1 1
5 ToS 6 2 2
D - Detail Classifier Display
U - Update Display
R - Return to Previous Menu
Enter your selection?