Allied Telesis AT-S62 - Manual (Page 265)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 265
The parts of the policies are:
❑ Classifier - Specifies the IP address of the node with a video
application. The classifier for Policy 17 specifies the address as a
source address since this classifier is part of a policy concerning
packets coming from the application. The classifier for Policy 32
specifies the address as a destination address since this classifier
is part of a policy concerning packets going to the application.
❑ Flow Group - Specifies the new priority level of 4 for the packets.
As with the previous example, the packets leave the switch with
the same priority level they had when they entered. The new
priority level is relevant only while the packets traverse the switch.
To alter the packets so that they leave containing the new level,
you would change option 5, Remark Priority, to Yes.
❑ Traffic Class - The packet stream is assigned a maximum
bandwidth of 5 Mbps. Bandwidth assignment can only be made
at the traffic class level.
❑ Policy - Specifies the traffic class and the port where the policy is
to be assigned.