Allied Telesis AT-S62 - Manual (Page 22)

22
Preface
This guide contains instructions on how to configure an AT-8500 Series
Layer 2+ Fast Ethernet Switch using the menu interface in the AT-S62
management software. For instructions on how to manage the switch
from the web browser interface or the command line interface, refer to
the AT-S62 Web Browser Interface User’s Guide and the AT-S62 Command
Line Interface User’s Guide. These guides are available from the Allied
Telesyn web site.
How This Guide is Organized
This manual is divided into the following sections.
Section I: Basic Operations
The chapters in this section explain how to perform basic operations on
the switch from a local or Telnet management session using the menus
interface. Some of the operations include setting port parameters,
creating port trunks, and viewing the MAC address table.
Section II: Advanced Operations
The chapters in this section explain some of the more advanced
operations of the switch. Examples include using the file system,
downloading and uploading files, and configuring Quality of Service.
Section III: SNMPv3 Operations
The chapter in this section explains how to configure the switch for
SNMPv3. (The instructions for SNMPv1 and SNMPv2 are in Section 1,
Basic Operations.)