Allied Telesis AT-S62 - Manual (Page 336)

Chapter 21: Networking Stack
Section II: Advanced Operations 336
The Display ARP Table menu is shown in Figure 119.
Figure 119 Display ARP Table Menu
The information in this table is for viewing purposes only. The
columns in the menu are defined here:
Interface
The network interface of a table entry. The switch has two
network interfaces. The “loopback” designation represents the
interface used by the switch for internal diagnostics. The “eth0”
designation represents the Ethernet network interface.
IP Address and
MAC Address
The IP addresses and their corresponding MAC addresses.
Type
The type of ARP entry. An entry can be permanent, meaning it can
never be deleted from the table, or temporary. Only the
“loopback” entry is permanent. All “eth0” entries are temporary.
Allied Telesyn Ethernet Switch AT-8524POE - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Display ARP Table
Interface IP Address MAC Address Type
---------------------------------------------------------
loopback
127.0.0.1 00:00:00:00:00:00 PERMANENT
eth0 149.22.22.22 00:30:84:32:8A:5B TEMPORARY
eth0 149.22.22.1 00:30:84:32:12:42 TEMPORARY
eth0 149.22.22.101 00:30:84:32:8A:1B TEMPORARY
eth0 149.22.22.27 00:30:84:32:6A:11 TEMPORARY
eth0 149.22.22.86 00:30:84:32:81:22 TEMPORARY
U - Update Display
R - Return to Previous Menu
Enter your selection?