Allied Telesis AT-S62 - Manual (Page 208)

Chapter 13: Event Log
Section II: Advanced Operations 208
Figure 61 shows an example of the event log in the Full display
mode. The Normal display mode does not include the Filename,
Line Number, and Event ID items.
Figure 61 Event Log Example
The columns in the log are described below:
❑ S (Severity) - The event’s severity. Table 3 defines the different
severity levels.
❑ Date/Time - The date and time the event occurred.
❑ Event - The module within the AT-S62 software that generated
the event followed by a brief description of the event. For a list of
the AT-S62 modules, see Table 4 on page 206.
❑ Event ID - A unique number that identifies the event. (Displayed
only in the Full display mode.)
❑ Filename and Line Number - The subpart of the AT-S62 module
and the line number that generated the event. (Displayed only in
the Full display mode.)
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Event Log
S Date Time EventID Source File:Line Number
Event
------------------------------------------------------------------
I 2/01/04 09:11:02 073001
garpmain.c:259
garp: GARP initialized
I 2/01/04 09:55:15 083001 portconfig.c:961
pcfg: PortConfig initialized
I 2/01/04 10:22:11 063001 vlanapp.c:444
vlan: VLAN initialization succeeded
I 2/01/04 12:24:12 093001 mirrorapp.c:158
pmirr: Mirror initialization succeeded
I 2/01/04 12:47:08 043016 macapp.c:1431
mac: Delete Dynamic MAC by Port[2] succeeded
Temporary (Memory) Log Events 1 - 5 of 212
P - Previous Page N - Next Page F - First Page L - Last Page
R - Return to Previous Menu
Enter your selection?