Allied Telesis AT-S62 - Manual (Page 341)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 341
Displaying the TCP Connections Table
The TCP connections table lists the active Telnet, SSH, and web browser
management sessions on a switch and includes the IP addresses of the
management stations. You can use the table to determine the number
of active, remote active management sessions open on a switch, as well
as identify the management stations.
To view the TCP Connections Table, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 7 on page 55.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 9 on page 61.
3. From the System Utilities menu, type 6 to select Networking Stack.
The Networking Stack menu is shown in Figure 118 on page 335.
4. From the Networking Stack menu, type 5 to select Display TCP
Connections.
An example of the Display TCP Connections table is shown in
Figure 121.
Figure 121 Display TCP Connections Table
Allied Telesyn Ethernet Switch AT-8524POE - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Display TCP Connections
Total number of TCP Listening sockets : 2
Total number of TCP connections : 2
Index
Local Address Foreign Address State
-----------------------------------------------------------
0
0.0.0.0:80 0.0.0.0:0 LISTEN
1 0.0.0.0:23 0.0.0.0:0 LISTEN
4 169.254.37.1:23 169.254.37.138:1051 ESTABLISHED
24 169.254.37.1:80 169.254.37.101:1075 ESTABLISHED
U - Update Display
R - Return to Previous Menu
Enter your selection?