Allied Telesis AT-S62 - Manual (Page 714)

Chapter 36: Management Access Control List
Section VII: Management Security 714
Adding, Deleting, and Viewing ACEs
You can add or delete ACEs from the Management ACL at any time. To
add an ACE, simply repeat the procedure in Creating a Management ACL
on page 712. A new ACE is automatically added to the existing ACEs
already in the Management ACL.
To delete an ACE, you perform the same procedure, but instead of
selecting option 2 - Add Management ACL Entry from the Management
ACL Menu, select option 3 - Delete Management ACL Entry. The
management software prompts you to enter the specifics of the ACE
that you want to delete.
When deleting an ACE, it can help to first display the contents of the
Management ACL and jot down on paper the IP address, mask, protocol,
and interface information on the ACE you want to delete. That way you
will have the information when the software prompts you for it.
There is also an option in the Management ACL Menu, Option 4, for
displaying all of the ACEs in the Management ACLs. The option lists the
ACEs along with the specifics of each ACE.