Allied Telesis AT-S62 - Manual (Page 180)

Chapter 12: File Downloads and Uploads
Section II: Advanced Operations 180
11. Click Browse and specify the location and file to be downloaded onto
the switch.
12. Click in the Protocol field and select as the transfer protocol either
Xmodem or, for a faster download, 1K XModem.
13. Click Send.
The software immediately begins downloading the file onto the
switch. The Xmodem File Send window in Figure 54 displays the
status of the software download. The download process takes several
minutes to complete.
Figure 54 XModem File Send Window
After receiving the file, the switch compares the version numbers of
the new and existing image files. If the new image file has the same or
an earlier version number as the file in the application block, the
switch cancels the update process. If the new image file has a newer
version number, the switch writes the file to the application block
portion of flash memory and then resets.
Caution
The switch will not forward any network traffic while writing the
image to flash and during the reset process. This can take several
minutes to complete.
This completes the procedure for downloading a new AT-S62 image
file onto a switch from an Xmodem management session.