Allied Telesis AT-S62 - Manual (Page 387)

AT-S62 Menus Interface User’s Guide
Section III: SNMPv3 Operations 387
The following prompt is displayed:
Enter Security Level [N-NoAuthNoPriv, A-AuthNoPriv,
P-AuthPriv]:
7. Select one of the following security levels:
N-NoAuthNoPriv
This option represents no authentication and no privacy protocol.
Select this security level if you do not want to authenticate SNMP
users and you do not want to encrypt messages using a privacy
protocol. This security level provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c, N-NoAuthNoPriv is the
only security level you can select.
A-AuthNoPriv
This option represents authentication, but no privacy protocol.
Select this security level if you want to authenticate SNMP users,
but you do not want to encrypt messages using a privacy
protocol.You can select this value if you configured the Security
Model parameter with the SNMPv3 protocol.
P-AuthPriv
This option represents authentication and the privacy protocol.
Select this security level to encrypt messages using a privacy
protocol and authenticate SNMP users. This level provides the
greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3
protocol.
The following prompt is displayed:
Enter Read View Name:
8. Enter a value that you configured with the View Name parameter in
the SNMPv3 View Table. See Creating an SNMPv3 View Table Entry on
page 370.
A Read View Name allows the users assigned to this Security
Group to view the information specified in the View Table. This
value does not need to be unique.
9. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.