Allied Telesis AT-S62 - Manual (Page 113)

AT-S62 Menus Interface User’s Guide
Section I: Basic Operations 113
An example of a multicast MAC address table is shown in Figure
30.
Figure 30 Display All Menu - Multicast MAC Addresses
The information in this menu is for viewing purposes only. The
columns in a multicast MAC address menu are defined below.
MAC Address- The static or dynamic multicast MAC address.
VlanID - The ID number of the VLAN where the port is an
untagged member.
Type - The type of address: static or dynamic.
Port Maps - The tagged and untagged ports on the switch that
are members of a multicast group. This column is useful in
determining which ports belong to different groups.
The other options in the Display Unicast MAC Addresses menu or
Display Multicast MAC Addresses menu are:
2 - Display Static
This selection displays just the static addresses assigned to the
ports on the switch.
3 - Display Dynamic
This selection displays just the dynamic addresses learned on the
ports on the switch.
4 - Display by Port
Displays the dynamic and static MAC addresses of a particular
port. When you select this option, you are prompted for a port
number. You can specify more than one port at a time.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Display All
Page 1
Total Number of MCAST MAC Addresses: 1
MAC Address VLAN ID Type Port Maps (U:Untagged T:Tagged)
------------------------------------------------------------------------
01:00:51:00:00:01
1 Static U:1-4
T:
U - Update Display
R - Return to Previous Menu
Enter your selection?