Allied Telesis AT-S62 - Manual (Page 532)

Chapter 25: Tagged and Port-based Virtual LANs
Section V: Virtual LANs 532
Example of Creating a Port-based VLAN
The following procedure creates the Sales VLAN illustrated in Port-based
Example 1 on page 519. This VLAN will be assigned a VID of 2 and will
consist of four untagged ports, Ports 1 to 4. The VLAN will not contain
any tagged ports.
To create the Sales VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 182 on page 528.
2. From the VLAN Configuration menu, type 4 to select Configure
VLANs.
The Configure VLANs menu is shown in Figure 183 on page 529.
3. From the Configure VLANs menu, type 1 to select Create VLAN.
The Create VLAN menu is shown in Figure 184 on page 529.
4. Type 1 to select VLAN Name and enter “Sales”.
5. Type 2 to select VLAN ID (VID) and enter “2”. This is the VID value for
the new VLAN.
6. Type 4 to select Untagged Ports and enter “1-4”. These are the
untagged ports of the VLAN. Press Return.
7. Type C to select Create VLAN.
8. After the switch displays the prompt notifying you that it created the
VLAN, press any key.
The new Sales VLAN has now been created.
9. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.