Allied Telesis AT-S62 - Manual (Page 315)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 315
Enabling or Disabling Denial of Service Prevention
To configure DoS defense, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 97 on page
294.
2. From the Security and Services menu, type 3 to select Denial of
Service (DoS).
The Denial of Service (DoS) Menu is shown in Figure 107.
Figure 107 Denial of Service (DoS) Menu
3. If you are implementing the SMURF or Land defense, you must
provide the IP address of a node connected to the switch and a
subnet mask. For the Land defense, you must also specify an uplink
port. To do this, complete the following steps. Otherwise, skip ahead
to Step 4.
a. Type 1 to select Lan IP Subnet.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
DoS Menu
1 - Lan IP Subnet
2 - SYN Flood Configuration
3 - Smurf Configuration
4 - Land Configuration
5 - Teardrop Configuration
6 - Ping Of Death Configuration
7 - IP Option Configuration
R - Return to Previous Menu
Enter your selection?