Sony GP-X1EM Grip Extension - Manual (Page 56)

56
Numeric Keypad Window
a Item display
This displays the name of the parameter being set using the
numeric keypad window.
b Max./min. value indication
This displays the maximum and minimum values of the
parameter.
c Input display
This displays the value being entered in the numeric
keypad window.
d Close button
This button closes the numeric keypad window.
e TC (timecode) button
When the numeric keypad window is opened to enter a
timecode value, this button appears in the pressed state.
The range of timecode values you can enter varies as
follows depending on the signal format.
00:00:00:00 to 23:59:59:xx
where xx = (number of frames per second) – 1
f – (minus) button
This button toggles the sign of the entered value.
g Clear button
This button clears the input display. It does not change the
parameter setting.
h Trim button
After entering the difference from the current value, press
this button to confirm the numeric input.
i Enter button
This button confirms the entered value.
If the value is set correctly, the numeric keypad window
closes.
If it is not set correctly, the input display changes color.
Keyboard Window
Except when changing source names, the following
characters cannot be used.
space, \, /, :, ;, , (comma), . (period), <, >, *, ?, ", |
1 Item display
2 Max./min. value
indication
3 Input display
4 Close button
5 TC button
6 – button
7 Clear button
8 Trim button
9 Enter button
Note