Effect register list view and editing – Sony GP-X1EM Grip Extension User Manual
Page 328
328
5
Press [Rename].
6
Enter a name of up to 8 characters in the keyboard
window, and press [Enter].
The following names cannot be used.
CON, PRN, AUX, CLOCK$, NUL
COM0, COM1, COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
Effect Register List View and Editing
You can display a list of effect registers including status
information (whether data is present and so on), then carry
out lock, copy, delete, and rename operations.
Displaying the list of effect registers
Press the menu title button at the top left of the Effect
menu.
The Effect >Status menu (6200) appears.
The status area shows a list of effect registers (1 to 99).
Register name displays
For the same number, the register name for the M/E-1
region takes precedence.
If there is no data for the M/E-1 region, then the register
name appears in the sequence M/E-2 >M/E-3 >M/E-4
>M/E-5 >PGM/PST >User1 to User8 >DME ch1 to DME
ch4 >Device1 to Device12 >P-Bus >GPI >Macro.
Indication colors
Each register has a color-coded border, indicating its
status.
Selected register:
Pale blue border
Register containing data:
Shown orange within the
border. If, however, there are one or more locked
regions, the display is in red.
Write-protecting the contents of the effect
register
This applies to all regions.
1
In the Effect >Status menu (6200), select the register.
2
Press [Lock].
The register is locked, and the background of the
register indication appears in red.
To release the lock
Press [Lock] once more, turning the contents of the frame
to orange.
Copying data in effect registers
This applies to all regions.
1
In the Effect >Status menu (6200), select the copy
source register.
2
In the
3
Select the copy destination register.
4
In the
Deleting data from effect registers
This applies to all regions.
1
In the Effect >Status menu (6200), select the register.
2
Press [Delete].
Renaming an effect register
This applies to all regions.
1
In the Effect >Status menu (6200), select the register.
2
Press [Rename].
3
Enter a name of up to 8 characters in the keyboard
window, and press [Enter].
The following names cannot be used.
CON, PRN, AUX, CLOCK$, NUL
COM0, COM1, COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
Note
Note