Sony GP-X1EM Grip Extension - Manual (Page 347)

Chapter
15
347
Macros
Macros
Overview
A macro is a function that is used to store a sequence of
control panel operations (events) as data in memory
(macro register), which you can recall to reproduce the
same sequence of operations as required.
To record menu operations in memory, see
“Menu
Macros” (page 369) .
Macro registers
The area of memory that holds a macro is termed a “macro
register.” For each control panel, there are 999 macro
registers, numbered 1 to 999.
Events
The individual control panel operations constituting a
macro are termed “events.” One macro can contain a
maximum of 99 events.
The following table shows the operations for each control
block of the control panel that can be saved as events in a
macro.
Control block Event
Cross-point control
block • Select cross-point
• Recall function assigned to a
cross-point button
• Enable/disable AUX mix
transition
• Recall page on cross-point pad
• Delegation selection in cross-
point button row (free assign
mode only)
• Select cross-point assign table in
cross-point button rows
AUX bus control block
(AUX bus operation
mode) • Select cross-point
• Enable/disable AUX mix
transition
• Recall page on cross-point pad
AUX bus control block
(router operation
mode) • Select cross-point
• Recall page on cross-point pad
Transition control block • Auto transition and cut in the
transition execution section
• Auto transition and key on/off in
the independent key transition
execution section
a)
• Select next transition
• Select transition type
• Enable/disable pattern limit
b)
• VTR/disk recorder/frame
memory clip playback, stop, cue-
up
b)
Transition control block
(simple type) • Auto transition
• Cut
b)
• Select transition type
• Enable/disable pattern limit
• VTR/disk recorder/frame
memory clip playback, stop, cue-
up
b)
Independent key
transition control block Auto transition and key on/off
a)
Flexi Pad control block • Select transition type of
independent key transition
• Recalling the following data
- Key snapshots
- Snapshots
- Wipe snapshots
- DME wipe snapshots
- Shotboxes
- Master timelines
• Executing effects, rewind
Key fader control block • Auto transition and key on/off in
the independent key transition
execution section
a)
• Select transition type
• Recall key snapshot
Numeric keypad
control block Recalling the following data
- Effects
- Snapshots
- Shotboxes
- Master snapshots
- Master timelines
Control block Event