Sony GP-X1EM Grip Extension - Manual (Page 332)

332
• It is not possible to add temporary attributes to a
master snapshot.
5
Press the [ENTER] button.
The specified snapshot is recalled.
When a master snapshot is recalled, the region
selection buttons are lit according to the saved region
information.
To cancel a snapshot recall operation
To cancel the snapshot recall, press the [UNDO] button.
It is not possible to cancel recalling of a master snapshot.
Creating and saving a master snapshot
Use the same procedure for creating and saving a master
timeline.
For master snapshot operations, use the [SNAPSHOT]
button instead of the [EFF] button.
For details, see “Creating and Saving a Master Timeline
(Numeric Keypad Control Block)” (page 323).
Snapshot Operations
(Flexi Pad Control Block)
In the Flexi Pad control block on each M/E bank and PGM/
PST banks, you can only carry out operations on snapshots
for that bank.
Flexi Pad control block
Banks and Registers
To allow operations on the 999 registers, the Flexi Pad
control block treats the registers in groups. These groups
are called “banks.” There are 100 banks, numbered 0 to 99,
and the following registers correspond to each bank.
Note
Bank number Register number
Bank 0 1 to 9
Bank 1 10 to 19
Bank 2 20 to 29
Bank 3 30 to 39
Bank 4 to bank 98 (likewise, 10 registers on each bank)
Bank 99 990 to 999
DEL button
UNDO button
Bank selection buttons
Memory recall section
SNAPSHOT button