Wind settings – Sony GP-X1EM Grip Extension User Manual
Page 267
267
a) The way in which the afterimage disappears is affected by both the
keyframe strobe [Decay] and [KF Strobe Dust] parameter
adjustments.
Disabling the afterimage trail
In the DME >Light/Trail >KF Strobe menu (4154), press
[KF Strobe Disable], turning it on.
If this function is enabled when creating a keyframe, even
as the effect passes a keyframe, no afterimage remains.
Setting a combine process
Select whether to add the Keyframe Strobe effect before or
after the combine.
• When you change the selection in the Process> group, the afterimages which had been added • When you do not combine images, the Keyframe Strobe effect only is applied, regardless of the selection in the In the Combine − > KF STRB: Add the Keyframe Strobe effect after the combine. The parameter data for the channel KF STRB − > Combine: Add the Keyframe Strobe effect before the combine. Parameters can be set Wind Settings • Enabling Wind automatically disables Trail, Motion Decay, or Keyframe Strobe if it is set. • There are differences in the Wind effect between the XKS-8470 and XKS-8475. Applying the Wind effect 1 Open the DME >Light/Trail >Wind menu (4155). 2 Press [Wind], turning it on. 3 Set the following parameters. a) 0.00 represents no afterimage. 100.00 represents no decay in the afterimage. Selecting the signal for the afterimage In the • Only [Mix Color] or [Ext Video] can be used between the Background , Trail , and Wind effects. If [Mix Color] or [Ext Video] is selected for one of these • When executing a 4-channel combination, [Mix Color] and [Ext Video] cannot be selected. Freeze Video: Freeze the input image to use as the afterimage. Flat Color: Uses a single color matte as the afterimage. You can set the following parameters. Hue Rotate: Use a color matte whose hue varies slightly with each frame for the trail of the afterimages. You Mix Color: Insert a mix color signal in the afterimage portion. Ext Video: Insert an external video signal input from Ext In in the afterimage portion. Rainbow: Use a freeze image with the hue changing every frame in the afterimage portion. The difference from 4 Dust Aspect ratio of stardust Notes Notes No. Parameter Adjustment No. Parameter Adjustment 1 Decay Amount of afterimage displayed a) 2 Shift H Extension in the horizontal 3 Shift V Extension in the vertical direction Notes No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Speed Speed at which the hue changes
up to then disappear.
>KF Strobe menu (4154), select one of the following.
with the lowest number among the channels being
combined is enabled.
independently for each channel.
portion
>Wind menu (4155), select the image to insert in the
afterimage trail.
effects, the [Mix Color] or [Ext Video] for the other
effects is disabled, and [Flat Color] is selected in its
place.
can set the following parameters.
[Hue Rotate] is that many colors appear
simultaneously. You can set the following parameters.
Aspect
direction