Sony GP-X1EM Grip Extension User Manual
Page 236
236
Gradation Matte:
If using boundary lines as borders
(see step
2
), this transitions from color 1 to color
Rainbow Matte:
The color gradually changes hue
from color 1 to color 2 on the border lines.
Radial Gradation:
Color 1 on the inner side is mixed
into color 2 on the outer side, according to the
shape of the art edge.
Radial Rainbow:
The hue of color 1 on the inner side
transitions to color 2 on the outer side, according
to the shape of the art edge.
Rainbow Gradation:
overwrites Radial Rainbow, giving a gradation
effect.
2
When other than [Flat Color] is selected, set the
gradation border lines for each pattern.
When [Gradation Matte] or [Rainbow Matte] is
selected
When [Radial Gradation] or [Radial Rainbow] is
selected
When [Rainbow Gradation] is selected
3
When [Gradation Matte] or [Rainbow Matte] is
selected, set modifiers as required.
When selecting [Angle] in the
and slanting the pattern
a) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction. 0.00 is no rotation.
When selecting [Speed] in the
and rotating the pattern at a constant speed
a) –100.00 is four rotations per second in counterclockwise direction.
+100.00 is four rotations per second in clockwise direction. 0.00 is in
stationary state.
No.
Parameter
Adjustment
1
H
Position of gradation border in
horizontal direction
2
V
Position of gradation border in
vertical direction
3
Soft
Softness of gradation border region
No.
Parameter
Adjustment
3
Soft
Softness of gradation border region
Flat Color
Gradation Matte
Rainbow Matte
Radial Gradation
Radial Rainbow
Rainbow Gradation
No.
Parameter
Adjustment
1
H
Position of gradation border in
horizontal direction
2
V
Position of gradation border in
vertical direction
3
RBW Soft
Softness of rainbow border region
4
GRD Soft
Softness of gradation border region
No.
Parameter
Adjustment
1
Angle
Rotation angle of pattern
a)
No.
Parameter
Adjustment
1
Speed
Rotation speed of pattern
a)
Angle determined by the
value of Angle (see step
3
).
Position determined
by H and V values
(When Angle (see
step
3
) is 0.)
Border line