Sony GP-X1EM Grip Extension - Manual (Page 495)

Chapter
23
495
Diagnostics
Control Panel Connection
Status
You can monitor the status of the power supply, IP
address, and other settings of the control panel in the Diag
>System Info >Row Status menu (7421).
The following information is displayed.
The status fields for all items other than “Row” are blank
if a control panel row is not installed or is not connected to
the network.
Row: Control panel row
PoE: PoE (Power over Ethernet) connection status
--: PoE-compatible Ethernet switch is not in use.
OK: PoE-compatible Ethernet switch is in use, and
power is supplied.
Error: PoE-compatible Ethernet switch is in use, but a
power supply problem occurred.
DC Power Supply: Power supply connection status
--: DC IN connector is not in use.
OK: DC IN connector is in use, and required voltage is
supplied.
Error: DC IN connector is in use, but a drop in voltage
occurred.
Boot Mode: Startup mode
Normal: Boot in normal operating mode.
Recovery: Boot in recovery mode.
IP Address: IP address
To display the latest status
Press [Refresh].
Note