Sony GP-X1EM Grip Extension - Manual (Page 177)

177
The selected folder and all folders below it in the
hierarchy are locked, and “L” is displayed on the
folder icons.
To release the lock
Select a locked folder, and press [Lock], turning it off.
• A selected folder that is within a locked folder cannot be
unlocked.
• When a folder is unlocked, the folders below it in the
hierarchy return to the lock state they had before it was
locked.
Still Image Operations
Creating a Still Image (Freeze)
Assigning a frame memory source bus signal to an FM
output and then executing a freeze captures a still image
and saves it in memory.
In a freeze, an image can be captured either as a video
frame (a “frame freeze”) or a video field (“field freeze”).
• When the system is powered off, files and folders in
memory are lost. Save any required files in storage.
• A field freeze is supported only when the signal format
is 1080i.
• When the available number that can be saved in each
signal format equals the following values, the freeze
operation cannot be executed.
- 1080P, 1080PsF, 1080i, 720P: “0” (“1” in pair mode)
- 3840×2160P, 3840×2160PsF: “3” (“7” in pair mode)
1
Open the Frame Memory >Clip/Still >Record menu
(2113).
2
Select the target FM output for operation in the FM
output selection area.
For details about the method of operation, see
“Selecting an FM Output” (page 175).
3
Press [Through], turning it on.
The input image on the frame memory source bus is
output on the target FM output.
The output on the FM output is delayed by one frame.
4
Select the save destination folder in the folder/file
selection area.
To create a folder
Press [New], and enter the folder name using the
keyboard window.
A folder cannot be created within a locked folder.
5
Set the name of the file to create.
Press [Name], and enter the file name using the
keyboard window. The specified file name is
displayed in the status area in the center of the screen.
Notes
Notes
Note
Note