Sony GP-X1EM Grip Extension User Manual

Page 530

530

Resource Share Setup page

If resource sharing is disabled, the logical switcher signal
format, physical switcher model, resource assignments,
and frame memory folder mode are not displayed.

Procedure

The resource sharing mode and system structure are
configured on the Resource Share Setup page.

Enable/disable resource sharing mode in [Resource
Share Mode].

To enable resource sharing

Select [On].

To disable resource sharing

Select [Off], and skip to step

Configure the logical switcher signal format in
[Format].

Signal format settings

In [Format], select the signal format for logical
switcher 1 in [L-SWR1] and for logical switcher 2 in
[L-SWR2].

Field frequency/frame frequency settings

Select the frequency in [Frame rate].

Input reference signal settings

Select the input reference signal in [Reference].

The combinations of settings that can be selected are
as follows.

• Set devices in a switcher system to the same

frequency.

• The [Frame rate] and [Reference] settings are

common to logical switchers 1 and 2.

• If the signal formats form an unsupported

combination, the format is automatically changed to
a setting that can be selected.

Set the physical switcher model in [Model].

Select [XVS-9000], [XVS-8000], [XVS-7000], or
[XVS-6000].

Configure resource assignments in [Resource
Configuration].

Note

Logical switcher configuration

Logical switcher signal format

Resource sharing mode
(enable/disable)

Logout button

Execute button

Default Recall
button

Resource assignments

Physical switcher model

File button

Frame memory folder mode

Format

Frame rate

Reference

L-SWR1

L-SWR2

2160P 2SI
2160P SQD
1080P

59.94
50

Tri Sync
BB

1080i

2160PsF
SQD
1080PsF

29.97
25

Tri Sync
BB

24
23.98

Tri Sync

720P

59.94

Tri Sync
BB

Notes