Metrohm 726 Titroprocessor User Manual
Page 86
5.3 Determinations
726 Titroprocessor, Instructions for use
80
80
When a sample series is being processed with the autostart function
switched on the series can be interrupted without terminating the
determination currently being carried out. With the help of the
>key (key combination <с
с
>
when the current determination has been finished. The Titroprocessor
returns to the normal state and the autostart counter is stopped.
In a sample series the current determination can be stopped with the
с
>
continued with the next determination .
Various entries can be made and settings altered while a determination is
being carried out. In particular, sample data can be entered via the
keyboard, from a balance or via a barcode reader. This is possible both for
individual determinations on the main page as well as for series of samples
in the sample silo.
5.3.2 Individual determinations
In order to carry out a simple individual determination the following settings
must be made:
[Load method]
•
Load a method into the working memory by pressing either the
[
и][з]
[
к][й]
[ENTER]
The method selection window could be similar to that shown below.
•
Use the cursor keys to select a method from the method list (internal
memory / data card) and press the
ЪДДД
Method
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ Internal saved methods Methods on data card ³
³ ³
³ 1156.mth 1158.mth NaOH.mth HCl.mth ³
³ 1345.mth 1387.mth GLP.mth CaMgTap.mth ³
³ 1388.mth 1388a.mth Chloride.mth Metals.mth ³
³ 1546.mth 1459.mth Fe3_back.mth Anionic.mth ³
³
3455.mth
3456.mth Cationic.mth Formol.mth ³
³ 3476.mth 3476a.mth Peroxide.mth TAN.mth ³
³ TBN.mth Diazo.mth ³
³ KF_Titer.mth KFsample.mth ³
³ SCsimple.mth SCrinse.mth ³
³ SC_CAL.mth ³
³ ³
³ Comment: ³
³ Chloride in Tap Water ³
³ ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ³
³ Press
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
DELAY
STOP
NEXT
START
METHOD
Method comments for
selected method