Metrohm 726 Titroprocessor - Manual (Page 73)

4. Manual operation Manual operation
726 Titroprocessor, Instructions for use 67 67
Softkeys
[Select
determ.]
opens a selection list of the determinations in the working
memory. A different determinationfor printing out reports
can be selected.
[Select
report]
if a titration or measurement within a determination has
been selected then this softkey opens the selection list
containing possible report modes , see below.
[Global
Reports]
opens the dialog window for selection of the global
reports, see below.
ЪДДД Print Determ.report ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ ЪДДД Print Global reports ДДДДДДДДД¿ ³
³ ³ ³ ³
³ ³ Configuration ³ ³
³ ³ Data card ³ ³
³ ³ Internal Storage ³ ³
³ ³ Commands ³ ³
³ ³ Method ³ ³
³ ³ Sample Silo ³ ³
³ ³ Devices & Manual Control ³ ³
³ ³ Common Variables ³ ³
³ ³ Full statistics ³ ³
³ ³ Short statistics ³ ³
³ ³ GLP ³ ³
³ АДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ДЩ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
[Send]
starts the output of the selected report to the
communication interface. The report is transferred to the
instrument (e.g. a personal computer) which is connected
to the defined RS232 interface.
[Print]
starts the output of the selected report at the configured
printer.
4.7.2 General reports
General reports are not dependent on a determination. They present the
momentary settings effective on the instrument.
Configuration Report of the settings in the configuration window and its
sub-windows
Data card List of stored files on the data card
Internal
storage List of stored files in the internal memory
Commands List of command sequences of the current method,
without parameters
Method Comprehensive listing of the current method , including
application remarks, command sequences and all their
parameters.
Sample Silo List of all sample data in the sample silo