Metrohm 726 Titroprocessor User Manual

Page 34

2.6 Connections

726 Titroprocessor, Instructions for use

2.6.7 Connecting an external printer

There are various ways of connecting an external printer to the 726 Titro-

processor.

Parallel printer interface (only for models 2.726.0010 and 2.726.0110)

Printer

Commercial printers for PCs (e.g. inkjet printers from Hewlett-Packard, Ep-

son, Canon) can be connected without any problems to the 'Printer' con-

nection on the rear panel of the Titroprocessor with the cable supplied by

the manufacturer.

So-called GDI printers (e.g. HP Deskjet 620 or 820) are specially

designed for use under MS-Windows

and can only be used under

MS-Windows

. They cannot be used with the 726 Titroprocessor.

Printer on the serial RS 232 interface

RS 232 Interface 1

RS 232 Interface 2

It is also possible to connect an external printer to models 2.726.0020 and

2.626.120. Printers which have their own serial RS 232 interface can be

connected directly to 'RS 232 Interface 1' or 'RS 232 Interface 2' with the

aid of cable 6.2125.050 (e.g. Epson LX-300).
If necessary commercial printers with a parallel Centronics interface can be

connected to one of the RS 232 interfaces of the Titroprocessor by means

of serial/parallel converter SP 1000 (2.145.0300). In addition a serial

6.2125.020 connection cable is required. Depending on the type of printer a

9V mains adapter for the SP 1000 converter and possibly an extension

cable between the converter and printer may be required. Please consult

your local Metrohm agency.