Metrohm 726 Titroprocessor User Manual

Page 11

11. Introduction

. Introduction

726 Titroprocessor, Instructions for use

1.3.5 Measuring interfaces / Measuring inputs

The 726 Titroprocessor models 2.726.0110 and 2.726.0120 are equipped

with 2 measuring interfaces (Sensors A and Sensors B).

The diagram below shows where the sensors are to be connected to meas-

uring interface A, which is found on all 726 Titroprocessor models.

Ind A2 Ind A1

Ref

Pol

Pt100/1000

Sensors A

1.3.6 Data cards

Data cards can be used to store methods or measuring data and to transfer

them from one instrument to another. They are an excellent mobile storage

medium.

Data
card

Attention must be paid to several points when handling data cards.

So-called PC cards which meet the Standard PCMCIA 2.x (68 Pins) / JEIDA

4.x can be used.
Flash cards

can be read but not written on, e.g. the application card

(Order. no. 6.6024.000) supplied with the Titroprocessor

Stirrer Int A con-

nector

Indicator electrode

Pt100 / Pt1000

Temperature sensor

Reference

electrode

Polarized

electrode

Right-hand side of housing

Eject button

Notch