Metrohm 726 Titroprocessor User Manual

Page 103

6. Sample data and sample silo

726 Titroprocessor, Instructions for use

Data output in the current sample data

The output pointer (<) marks the silo line which will be used for the next
determination in a sample series. The output marker is set in the same way

as the input marker (Softkey [<--Out pointer]).

In order to process a sample series the sample data must first be entered in

the sample silo. Place the output marker on the silo line with which the

sample series is to start.

The number of samples or silo lines to be processed can be set in the

status window ( key) or on the main page with the option
'Auto start'

. Not only a number can be entered. The entry 'Silo' has

the effect that all silo lines after the output marker will be processed.

The method which is to be used for one or more particular samples can be

defined in the method input field of each silo line. The specified method is

loaded into the working memory before the affected line(s) are processed

and carried out with the sample data of the current silo line. If this possibility

is used then no alterations can be made to the particular methods loaded

while the sample series is being processed. An open method editor

prevents another method from being loaded.

If no method has been specified then the current method in the working

memory will be used. When a determination has been completed the

sample data remain in the sample silo but the output marker is moved

downwards by one position.