beautypg.com

3 curve presentation – Metrohm 726 Titroprocessor User Manual

Page 228

background image

10.3 Curve

Curve presentation

726 Titroprocessor, Instructions for use

222

222

Hold down the

с>

(Shift) key and press the cursor key <é> or <ê>.

The selected curves will be marked with the ‘ь

ь

’ sign and displayed when

the key is pressed. The same method can be used to remove

curves again.

ЪДДДДДДДДДДДДДДДДДДДДДДДДД¿
³

ь

ь

971208.003 #2 DET_PH*

³

³ 971208.004 #2 DET_PH* ³

АДДДДДДДДДДДДДДДДДДДДДДДДДЩ

ЪДДДДДДДВДДДДДДДВДДДДДДД¿ ЪДДДДДДДВДДДДДДДВДДДДДДД¿

³Select ³ Add ³Records³ ³ * ³ * ³ * ³

³file ³curves ³ ³ ³ Param ³Formula³ Report³

АДДДДДДДБДДДДДДДБДДДДДДДЩ АДДДДДДДБДДДДДДДБДДДДДДДЩ

Overlapping curves are shown in light gray except for the active curve. The

<é> and <ê> keys are used in order to select a particular curve. This

then becomes the active curve and is shown in black. The corresponding

name of the determination file is shown in the title line. Only the EPs of the

active curve are visible.

10.3 Curve presentation

The presentation of the curves of a titration or series of measurements can

be altered at a later date. All those settings are available which are possible

for the titration or measuring mode. Please note, for example, that for the

presentation of curves on the time axis or the presentation of derivative

curves in the SET mode the necessary data must be present in the

measuring point list. The corresponding settings (Time recording,
Derivation

…) must have been used in the determination, see page

150f.

The settings for the curve display can be found in the curve window under

the softkeys [* Param][Curve display].

ЪДДД

* Display

ДДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿

³ ³

³ Curve Y_Axis X_Axis ³

³ ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ³

³ Quantity M. value Volume ³

³ Scale auto auto ³

³ begin pH mL ³

³ end pH mL ³

³ Division 1 mL/cm ³

³ Grid off ³

³ ³

АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД

QUIT ÄÙ

Quantity Y_Axis

Quantity on the Y-axis

M. value | Volume | Temp. | dMV/dV

dMV/dt |dV/dt | MV,Temp | MV,dMV/dV | all

Apart from the standard presentation of measured

value/volume other forms of presentation are possible.