Metrohm 726 Titroprocessor - Manual (Page 42)

3.1 Basic Basic settings
726 Titroprocessor, Instructions for use 36 36
In this way it is possible to reconstruct the whole
configuration of the Titroprocessor at a later date, or
to install the same settings on different instruments.
When loading a configuration file the individual
configuration areas can be selected for individual
take-over.
[Access
control]
opens, after the corresponding password has been
entered, the configuration page for definition of the
access control. Individual keys on the keyboard as
well as most of the softkeys on the dialog pages can
be blocked or blinded out. Details can be found on
page 271.
[Interfaces]
opens the configuration window of the interfaces.
The transfer parameters of the RS232 interfaces can
be entered here and the definition of balances and
printer set. Details can be found on page 44.
[Config
idents.]
opens the configuration window of the sample
identification fields. The titles of the fields (Ident1…3)
can be freely selected. The field types determine
whether the contents of the sample identification
fields are to be interpreted as text or as numerical
values. In the latter case the sample identifiers
(system variables ID1…3) can be used in calculation
formula, see page 118ff.
If the sample silo is switched on then the definitions
of the sample identification fields in the sample silo
are valid. See also page 96.
[Buret
unit]
opens the configuration window of the buret units. In
order to use the dosing functions preparation
(PREP) and empty (EMPTY) in an optimal way it is
necessary to define buret units in which the tubing
dimensions and other settings for this function are
fixed. Details can be found on page 46ff.
[>> >>]
switches to the second softkey bar.
[Service
diagn.]
opens the dialog window for instrument diagnosis . It
is possible to test the various instrument
components and functions in order to check the
functional capabilities of the Titroprocessor 726.
Instrument diagnosis should be carried out with
great care as improper handling could result in
important data being deleted. Certain of the
diagnostic functions are reserved for our service
technicians.
Instrument diagnosis is described on page 260ff.