Metrohm 726 Titroprocessor - Manual (Page 233)

11. File manager
726 Titroprocessor, Instructions for use 227 227
[Send
opens the selection list for selection of the RS232
to RS]
interface via which the marked file(s) are to be
transmitted. If no file has been marked then the file
selected with the cursor will be transmitted.
[Receive
opens the selection list for selection of the RS232
from RS]
interface via which the marked file(s) are to be received.
[Sort by]
opens the selection list for selection of the sorting
criteria of the file list. The following are available: 'by
name'
, 'by comment', 'by extension', 'by
size'
and 'by date'. The sorting sequence can be
set to ascending or descending.
[Select]
opens the dialog window for entry of the selection mask
for marking particular files. The files are marked in which
the criteria of the file name and the file comments agree
(AND linkage). The following wildcards are available for
definition of the selection masks:
*
= any character sequence
?
= any character
#
= any number
The files which meet the selection criteria are marked
with an arrow '->' and sorted to the top of the file list.
[Format
formats a data card. This can given a name. This
softkey is only visible
card]
if the data card has been selected as the memory area.
[ >>
switches to first softkey bar.
>>]
Please note that the Titroprocessor 726 differentiates between capital and
lower-case letters and remember this when sorting the file list or choosing
selection lists.
11.3 Format data card
In order for them to store data, data cards must first be formatted before
they are used for the first time. The format of the file system created
depends on the type of instrument. It is not possible to read in or write on
data cards from other Metrohm instruments or cards with PC-readable file
systems without first reformatting them in the Titroprocessor 726.
Reformatting procedure
• Insert the data card (only SRAM cards) in the card slot.
• Open the Titroprocessor file manager.
• Press the [Change storage] softkey and select 'Data card'.
• If the data card has never been formatted or has an unreadable file
system this will be recognized by the Titroprocessor and a query about
formatting the card will appear.