Metrohm 726 Titroprocessor - Manual (Page 232)

11.2 File operations
726 Titroprocessor, Instructions for use 226 226
ЪДДД File manager: Data card ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ Label : 726 Applications Files : 21 of 256 ³
³ Capacity: 262144 Bytes *Write protected* Avail.: 173352 Bytes ³
³ ³
³ File Comment Size ³
³ ДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ДДДДД ³
³ NaOH.mth Titer of NaOH 3816 ³
³ HCl.mth Titer of HCl 3819 ³
³ GLP.mth Titer of HCl (validation method) 3873 ³
³ CaMgTap.mth Calcium / Magnesium in Tap Water 3746 ³
³ Chloride.mth Chloride in Tap Water 3735 ³
³ Metals.mth Complexometric Titration of Metals with Cu++ ISE 3841 ³
³ Fe3_back.mth Complexom. back titration of Fe(III) with Cu++ ISE 3908 ³
³ Anionic.mth Anionic Surfactants in Shampoo 3831 ³
³ Cationic.mth Cationic Surfactants in Fabric Softener 3902 ³
³ Formol.mth Formaldehyde Number in Fruit Juices 5319 ³
³ Peroxide.mth Peroxide Number 3941 ³
³ TAN.mth Total Acid Number (TAN) 3737 ³
³ TBN.mth Total Base Number (TBN) 3737 ³
³ Diazo.mth Diazotisation titration of 2-Aminophenol 3771 ³
³ KF_Titer.mth Titer of KF Reagent with standard 6903 ³
³ KFsample.mth Water determination in oil 6845 ³
³ SCsimple.mth Rinse and aspirate in the titration beaker 2545 ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ДЩ
ЪДДДДДДДВДДДДДДДВДДДДДДД¿ ЪДДДДДДДВДДДДДДДВДДДДДДД¿ ЪДДДДДДДВДДДДДДДВДДДДДДД¿
³Change ³Change ³Un/Lock³ ³ Load ³ Copy ³Delete ³ ³Un/Mark³Un/Mark³ >> ³
³view ³storage³file ³ ³ from ³ to ³ ³ ³ ³all ³ >> ³
АДДДДДДДБДДДДДДДБДДДДДДДЩ АДДДДДДДБДДДДДДДБДДДДДДДЩ АДДДДДДДБДДДДДДДБДДДДДДДЩ
11.2 File operations
It is strongly recommended that a data card is not removed during file
operations!
Softkeys
[Change
alters the file list display
view]
[Change
selects a different memory area
storage]
(working memory, internal memory, data card)
[Un/Lock
marks a file with an '*' as blocked
file]
(write-protected) and vice-versa. A blocked file cannot
be deleted or overwritten. It must first be unblocked.
[Load from]
opens a selection list for selecting a memory area from
which a file is to be copied into the memory area
currently opened.
[Copy to]
opens a selection list for the selection of the
memory area to which the marked file(s) are to be
copied. If no file has been marked then the file selected
with the cursor will be copied.
[Delete]
deletes the marked file(s). If no file has been marked
then the file selected with the cursor will be deleted.
[Un/Mark]
marks the file selected with the cursor and vice versa.
[Un/Mark
marks or unmarks all files in the shown
all]
memory area.
[ >>
switches to second softkey bar.
>>]