Metrohm 726 Titroprocessor - Manual (Page 213)

8. Command reference 8. Command reference
726 Titroprocessor, Instructions for use 207 207
This also applies when the sample silo is being used. In
this case the entries in the input fields can be edited un-
der [Sample silo] / [>> >>] [Sample
idents]
.
none
no sample ident queries
1
only query Ident1
2
only query Ident2
3
only query Ident3
1+2
query Ident1 and Ident2
all
query Ident1…3
The input of a sample remark is always possible in the
ASK window.
Size
Query mode for sample weight
no | yes | confirm.
A sample weight query can be made in different ways.
no
no sample weight query
yes
after sample weight input the ASK
window is closed automatically
confirm.
Sample weight input possible, the
ASK window must be closed with
.
HOLD
Interrupt method run
The method run can be interrupted with the HOLD command. From the
Hold condition the method can be restarted with the key
or . In the Hold condition the yellow keyboard keys can be used
(e.g. , ). In this way it is possible to operate
the different peripheral devices in the Hold condition.
Parameters
Display text of HOLD window
50 characters
A text can be entered for display in the Hold window. Ex-
ample:
ЪДДДДДДДДДДДДДДДДДДДДДД Message ДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ Hold: ³
³ ------- Add sample now! ------------------------ ³
³ Press ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
WAIT
Waiting time in method run
The method run can be interrupted for a preset time (in seconds) with the
WAIT command. The duration of the interruption is defined with the line time
of the command line. If no line time is given then the method run will remain
interrupted until the WAIT display window is closed with the key.
This is also possible if a defined waiting time has to be prematurely termi-
nated.