Metrohm 726 Titroprocessor - Manual (Page 30)

2.6 Connections
726 Titroprocessor, Instructions for use 24 24
700 685
Dosimat B2
Dosimat B1
729
Dosimat B3
Dosimat B4
EBus
Address 1
EBus
Address 2
External Bus
EBus
Address 1
717 717
700 685
Dosimat C2
Dosimat C1
729
Dosimat C3
Dosimat C4
EBus
Address 2
700 685
Dosimat A2
Dosimat A1
700 685
Dosimat A4
Dosimat A3
Line distributor
726
Dosing
devices
Power cables
2.6.4 Sample changers
External Bus
B
One or two 717 Sample changers can be connected to the 'external
bus' sockets of the 726 Titroprocessor. Take care that the address
selector disk is set correctly (see above). Please connect up larger
systems according to the above diagram.
Two 717 Sample changers can be connected at the same time;
however, they cannot be used simultaneously in one automatic
method. It is possible to change the active sample changer within a
method (see command 'CHANGER').
Manual operation of a sample changer while the other sample
changer is busy carrying out a method is possible and does not
present any problems.