Metrohm 726 Titroprocessor - Manual (Page 222)

9.1 Results page
726 Titroprocessor, Instructions for use 216 216
The results are organized in columns which are arranged in the sequence of
the occurrence of the result variables (Rxx, Xxx or Cxx).
5 results columns are visible at once. The or <и и > keys are used
to switch to the next column or statistics page. <с с > or <з з > switch
to the previous column or page. The cursor keys <к к >, <й й > and
or are used to move the cursor within a column.
If the statistics function is switched on (main page 'Statistics on')
then determinations can later be copied into the working memory. After
renewed recalculation with the [Recalc all] softkey on the results page
these will then be included in the statistics.
Single results can be excluded from calculation of the statistical data by
selecting the relevant result with the cursor keys and pressing the
[Un/Mark]
softkey. The statistics will then be recalculated immediately.
Results suppressed in this way are marked with an '!' sign. The marking can
be removed in the same way.
The file names in the determinations are marked with 2-place file attributes.
They show how the results of the particular determination have been
achieved.
The first file attribute character stands for the method used for the
determination. The second character stands for the type of calculation.
Attribute Method Calculation
o = original unmodified unmodified
n = new new, not stored
m = modified loaded and modified newly calculated
Example:
DATA.001 om
This means that the determination DATA.001 was carried out with a stored
and unmodified method. The results were later recalculated with either
altered formulas or altered sample data.