Metrohm 726 Titroprocessor User Manual
Page 214
8.14 Auxiliary commands
726 Titroprocessor, Instructions for use
208
208
t/s Command Parameters Parameters
ДДДДД ДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДД
10
WAIT
Parameter
Display text in WAIT window
50 characters
A text can be entered for display in the WAIT window. Ex-
ample:
ЪДДДДДДДДДДДДДДДДДДДДДД
Message
ДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ Wait: ³
³ --------- Please wait 10 seconds! ------------- ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
WAIT_T
Continue method run at set time
The WAIT_T command interrupts the method run and continues it at a de-
fined time. A requirement for the sensible use of this command is that the
system time of the 726 Titroprocessor is correctly set. In this way, e.g. it is
possible to start a sample series at a particular time by programming the
WAIT_T command in a (OMOVE start sequence at the start of a method.
Command Parameters Parameters
ДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДД
WAIT_T
08:49:55
Parameters
Time
The time must be entered in the format
hours:minutes:seconds (hh:mm:ss).
ЪДДДДДДДДДДДДДДДДДДДДДД
Message
ДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ Wait until ³
³ time 08:50:00 cur. time 07:25:23 ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
The message window can be closed with
thus the method run can be continued before the defined
time has been reached.
WAIT_C
Wait for conditioning
The WAIT_C command only makes sense in combination with a previous
conditioning command such as SEC or KFC. Conditioning is basically car-
ried out in the background. As soon as the WAIT_C command is reached
in the method run this takes control of the conditioning process and the
WAIT_C window is shown. The WAIT_C command defines the behavior
when the conditioned state of the sample has been achieved.
t/s Command Parameters Parameters
ДДДДД ДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДД
99999
WAIT_C