Rockwell Automation 2094-xMxx-S Kinetix 6000 Multi-axis Servo Drives User Manual - Manual (Page 222)

222 Rockwell Automation Publication 2094-UM001H-EN-P - June 2013
Appendix B Upgrading the Drive Firmware
The Progress dialog box opens and
upgrading begins.
The drive module seven-segment
status indicator changes from the fixed 2, 3, or 4 to F, which indicates that
upgrading is in progress.
After the upgrade information is
sent to the drive, the drive resets
and performs diagnostic checking.
14. Wait for the Progress dialog box to
time out.
15. The Update Status dialog box opens and indicates success or failure as
described below.
16. Click OK.
Upgrading Status If
Success
1. Update complete appears in a GREEN Status dialog box.
2. Go to
step 16 .
Failure
1. Update failure appears in a RED Status dialog box.
2. Refer to ControlFLASH Firmware Upgrade Kit Quick Start, publication
1756-QS105 , for troubleshooting information.