Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Instruction Manual - Manual (Page 38)

displays, perform current trending, historical trending, create historical data files, and
centralize data logging; and how a personal computer can be used to configure controllers
online, compile F-TRAN programs, download F-TRAN programs, edit recipes, and produce
controller configuration documentation.
•
Publication Number 24368, Instruction Bulletin 53HC3300D, Custom Program Inter-
face (MICRO-DCI

Instrument to MS-DOS® Personal Computer).
This book provides installation and operating information for the Custom Program Inter-
face software that runs under MS-DOS on a personal computer. It also provides descrip-
tive information for the following product package capabilities: personal computer
communication to the controller using the COM1 or COM2 port; how a personal computer
can be used to configure controllers on-line, compile F-TRAN programs, download F-
TRAN programs, and produce controller configuration documentation; how a personal
computer can be used to access the MICRO-DCI database with user programs written in
BASIC; and how to create files to generate custom EPROMs for MICRO-DCI products.
•
Publication Number 24470, Instruction Bulletin 53MC9011, Revision 2, MicroLink

.
This book provides information to install and configure modular controllers for operation on
a MicroLink network. It specifies the cabling requirements and provides the MicroLink
loads calculation procedure. There is also a separate section that provides all of the
necessary Datalink-MicroLink combined network gateway information.
•
Publication Number 24526, Instruction Bulletin 53MC9014, 53MC5000 HART

Interface.
This book provides information to calculate the required HART network cable lengths. It
contains information to install the HART ITB and HART Modem ITB, as well as a checklist
that can be referenced to help expedite online operation of the HART network. It also
provides instructions to use the operator displays, and information to configure the control-
ler for HART operation. The maintenance section of the book provides a parts replace-
ment procedure, parts list, illustrated parts breakdown, illustrations of the Expansion Board
HART Modem Option Card and Auxiliary Processor Board (APB), and illustrations of the
HART ITB and HART Modem ITB.
•
Publication Number 24926, Instruction Bulletin 53MT6000, Micro-Tools

This manual provides information for the Micro-Tools product. Micro-Tools is a Windows
NT-based configuration tool for the 53MC5000 family of Process Control Stations. The
Micro-Tools product helps reduce controller configuration and maintenance time by provid-
ing an easy to use view into the database and configuration of the instrument.
•
Publication Number 24828, Configuration Guide 53PW6000, Micro-PWC

The Micro-PWC Configuration Guide is designed for use with Micro-DCI and other compat-
ible equipment. The Micro-PWC Configuration Guide describes the operations required to
configure the Micro-PWC product. It provides information on how to perform configuration
tasks on the Micro-PWC and provides suggestions and examples for configuration activi-
ties.
•
Publication Number 24924, Installation & Setup Guide 53PW6000, Micro-PWC

The Micro-PWC

Installation and Setup Guide describes a software product which pro-
vides a process control operator interface for several Micro-DCI instruments. The heart of
this product is a suite of applications that provide easy to use, state-of-the-art displays and
tools to a plant operator.
53MC5000 Process Control Station
1-24