Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Instruction Manual - Manual (Page 319)

Table 18-3. Related Parts List
Part Number Description
614B836U02 Trim Collar and Spacers for Three Cases
614B836U03 Trim Collar and Spacers for Four Cases
614B836U04 Trim Collar and Spacers for Five Cases
614B836U05 Trim Collar and Spacers for Six Cases
614B836U06 Trim Collar and Spacers for Seven Cases
614B836U07 Trim Collar and Spacers for Eight Cases
614B836U08 Trim Collar and Spacers for Nine Cases
614B836U09 Trim Collar and Spacers for Ten Cases
614B836U010 Trim Collar and Spacers for Eleven Cases
614B836U011 Trim Collar and Spacers for Twelve Cases
614B836U012 Trim Collar and Spacers for Thirteen Cases
614B836U013 Trim Collar and Spacers for Fourteen Cases
614B762U02 Kit of Three Plates for 3 X 6 Instrument Panel Cutout
123G001U01 Two panel Mounting Brackets
612B403U01 Panel Opening Filler Parts (used to fill panel opening if case and instrument
are removed).
614B94U01 Gasketed clear plastic display cover kit for one controller
614B94U02 Gasketed clear plastic display cover kit for two side by side controllers
129A003U03 PVC track, 4 foot (1.2 m) long, 2.9 in. (74 mm) wide for ITB mounting
614B958U02 Kit, 12 adapters to mount PVC track on 32 or 35 mm DIN rail
614B767U03 Valve holder kit
677B049U01 Valve holder cable - 5 feet (1.52 m)
677B049U02 Valve holder cable - 10 feet (3.05 m)
677B049U03 Valve holder cable - 15 feet (4.57 m)
677B049U04 Valve holder cable - 20 feet (6.10 m)
677B049U05 Valve holder cable - 25 feet (7.62 m)
698B182U01 Hand Held Configurer
698B182U02 Hand Held Configurer with connector for memory module
614B890U01 32 KB RAM Memory Module
698B186U01 Hand Held Configurer cable assembly
2 of 2
Section 18. Maintenance and Parts List
18-10