Metrohm 732 IC Detector - Manual (Page 97)

4 Operation
732 IC Detector / 733 IC Separation Center
90
>CONFIG/printer
id.2
18 ASCII characters
Identification 2 for 2 nd line of print header
Freely selectable ASCII character string for the second
line of the print header (text entry, see section 4.2.5).
>CONFIG/printer
print header: once
once, always, off
Printout of the print header
The print header comprises title line (with device name,
serial number and program number), identification 1
and 2 as well as date and time if selected and is printed
out before a measured value, report or curve plot.
once Printout of the print header only once
after the instrument has been switched
on before each measured value, report
or curve plot.
always Printout of the print header before every
measured value, report or curve plot.
off No printout of the print header.
>CONFIG/printer
date&time: on
on, off
Printout of date and time in the print
header
on Date and time are printed out in the print
header.
off Date and time are not printed out in the
print header.
>CONFIG/printer
send to: IBM
IBM, Epson, Seiko,
Citizen, HP
Selection of the character set/printer type
IBM Character set 437 for IBM PC or printer
type IBM Proprinter
Epson EPSON printers
Seiko Seiko printer DPU-411/414
Citizen Citizen printer IDP562 RS
HP HP printers (Deskjet..., Laserjet... etc.)
You will find further details on the printer connection in
section 2.9.5.
>CONFIG
>CONFIG/print meas.value Settings for measured value printout
Output of measured values via RS232 interface.
>CONFIG/print meas.value
print crit.: immed.
immed., time, off
Criterion for measured value printout
immed. Measured value printout each time the
is pressed.
time Automatic measured value printout at
selectable time intervals.
off No measured value printout.