Metrohm 732 IC Detector - Manual (Page 14)

1.2 Parts and controls
732 IC Detector / 733 IC Separation Center
7
29 29 Opening for detector cable B
opening for connecting cable
detector block B – 732
39 39 Detachable rear panel
access to bottom part of inner
compartment
30 30 Opening for outlet capillary B
discharge of the eluent of column B to
waste
40 40 Opening for inlet capillary A
supply of the eluent for column A
31 31 Rear panel opening
(closed with plastic stopper) for
additional supply and discharge lines
to and from the inner compartment
41 41 Rear panel opening
(closed with plastic stopper) for
additional supply and discharge lines
to and from the inner compartment
32 32 Opening for outlet capillary A
discharge of the eluent of column A to
waste
42 42 Connection for drain tube
for discharge of spilled liquid from the
inner compartment
33 33 Opening for detector cable A
opening for connecting cable
detector block A – 732
43 43 Rear panel opening
(closed with plastic stopper) for
additional supply and discharge lines
to and from the inner compartment
34 34 Knurled screw
for fastening the rear panel 35 35
44 44 Opening for inlet capillary B
supply of the eluent for column B
35 35 Detachable rear panel
access to top part of the inner
compartment
45 45 Connection for 732 IC Detector B
36 36 Connection for 732 IC Detector A 46 46 Terminal block for valve B
Ground, Fill, Inject:
inputs for control of the valve
Pos.Fill:
output signal on switching of the
valve to position "FILL"
Integr.Start:
output signal on switching of the
valve to position "INJECT"
37 37 Knurled screw
for fastening rear panel 39 39
47 47 Model plate
with serial number
38 38 Terminal block for valve A
Ground, Fill, Inject:
inputs for control of the valve
Pos.Fill:
output signal on switching of the
valve to position "FILL"
Integr.Start:
output signal on switching of the
valve to position "INJECT"
48 48 Connection for external supply
connection of power supply unit
(5 V, 0.5 A / 24 V, 2 A) in operation
without 732 IC Detector