Metrohm 732 IC Detector User Manual
Page 123
4 Operation
732 IC Detector / 733 IC Separation Center
116
>EVENT
>EVENT/edit
Edit existing event
>EVENT/edit
event:YY-MM-DD HH:MM:SS
Select existing event
Selection of the event with the
Date and time of an existing event can not be
changed later.
EVENT YY-MM-DD HH:MM:SS
XXXXXXXXX ---
Edit program points
After confirmation of the selected date or time with
sible program points of an existing event. Date and time
of the event then appear in the top line of the display,
whereas in the bottom line the program points associ-
ated with the event can be edited in turn. For all pro-
gram points, the default value
"
---
"
means that no
action follows.
Except for the missing parameter
"
flag
"
, the program
points for events are identical with the program points
which can be entered under the
are thus not described further here (see section 4.7.1).
In addition to this points, the program point
"
prog R/S"
can be entered (see under
">EVENT/new"
).
>EVENT
>EVENT/delete
Delete individual event
>EVENT/delete
event:YY-MM-DD HH:MM:SS
Select event for deletion
Selection of the event with the
The event will be deleted
Abort of the deletion operation.
>EVENT
>EVENT/delete all
Delete all events
>EVENT/delete all
delete all?
Confirm deletion of all events
All events will be deleted.
Abort of the deletion operation.