Metrohm 732 IC Detector - Manual (Page 121)

4 Operation
732 IC Detector / 733 IC Separation Center
114
4.7.2 key
R/S
PROG
The key is used to start or stop the program loaded in
the working memory. The status of the LED in the key indicates what it
can trigger:
LED off Program disabled
No action is triggered with the key. A
loop program can not be started until the parameter
" PROGRAM/parameters/status = enabled " has been
set.
LED lit up Program enabled
The key is used to start a loop pro-
gram. The current time is automatically set to
" 0.0 min " .
LED flashes Program running
The key is used to stop an ongoing
loop, remote or inject program.
If a program is running, the ,
SCALE>, and keys
are locked.
4.7.3 key
EVENT
5
Under the key maximum 4 different events, which can be
triggered (once or daily) at a particular time, can be entered. These
events can each comprise up to 14 individual program points.
The key opens the following main menu:
EVENT
>EVENT/new Enter new event
EVENT
>EVENT/edit Edit existing event
EVENT
>EVENT/delete Delete individual event
EVENT
>EVENT/delete all Delete all events
Repeated pressing of the key selects the submenus in turn.
The individual inquiries of the submenus are accessed using the
key and exited with the key. The following listings
show all dialog items which appear under . The values
shown in the displays are the default values, the possible entry values
and ranges are shown below the display.