Metrohm 732 IC Detector - Manual (Page 122)

4.7 Programming
732 IC Detector / 733 IC Separation Center
115
>EVENT
>EVENT/new Enter new event
>EVENT/new
format: date
date, daily
Event format
date The event is triggered once at a particular
time.
daily The event is triggered daily at a particular
time.
>EVENT/new
event:YY-MM-DD HH:MM:SS
YY: 00 … 99 HH: 00 … 23
MM: 01 … 12 MM: 00 … 59
DD: 01 … 31 SS: 00 … 59
Date and time for a new event
This inquiry appears only with "f ormat = date " .
Entry of date and time when the event should be trig-
gered (
YY: 00 … 94 = 2000 … 2094, 95 … 99 =
1995 … 1999 ).
>EVENT/new
event: HH:MM:SS
HH: 00 … 23
MM: 00 … 59
SS: 00 … 59
Time for new event
This inquiry appears only with " format = daily " .
Entry of the time when the event should be triggered
daily.
EVENT YY-MM-DD HH:MM:SS
XXXXXXXXX --- Edit program points
After confirmation of the inputted date or time with
, it is possible to edit the maximum 14 pos-
sible program points of a new event. Date and time of
the event then appear in the top line of the display,
whereas in the bottom line the program points associ-
ated with the event can be edited in turn. For all pro-
gram points, the default value " --- " means that no
action follows.
Except for the missing parameter
" flag " , the program
points for events are identical with the program points
which can be entered under the key and
are thus not described further here (see section 4.7.1).
In addition to this points, the following program point
can be entered:
EVENT YY-MM-DD HH:MM:SS
prog R/S: ---
---, on, off
Start/stop program
on Start of the program loaded in the working
memory (corresponds to the
key, see section 4.7.2).
off Stop of the program loaded in the working
memory (corresponds to the
key, see section 4.7.2).