Metrohm 732 IC Detector - Manual (Page 82)

4.2 Fundamentals of the operation
732 IC Detector / 733 IC Separation Center
75
Key Standby mode Edit mode
PLOT
1
Start graphics plot
• Output of measured value curve on
an external printer (abort with
).
Numeric entry ('1')
REPORT
2
Start report output
• Selection of report and output on an
external printer (abort with ).
Numeric entry ('2')
or
return to standby mode
PRINT
3
Start measured value output
• Output of single measured values or
start of the continuous measured
value output on an external printer
(abort with ).
Numeric entry ('3')
MARK
0
Trigger marking
• Sets a marking signal of ca. 10% of
the full-scale range at the analog
output.
Numeric entry ('0')
.
No function Numeric entry ('.')
or
narrowing of the full-scale
range (see )
or
text entry
• Activation of the text entry mode.
• Shift of the moving character string to
the left (see section. 4.2.5).
- /+
No function Change in the sign ('–/+')
or
widening of the full-scale
range (see )
or
text entry
• Activation of the text entry mode.
• Shift of the moving character string to
the right (see section 4.2.5).