Metrohm 732 IC Detector User Manual
Page 59
3 Operating tutorial
732 IC Detector / 733 IC Separation Center
52
CONFIG
>CONFIG/auxiliaries
The title of the submenu
"
auxiliaries
"
appears in the
bottom line of the display. This submenu contains, among
other things, the inquiries for entry of the date, time and
dialog language.
ENTER
⇒
Press the
>CONFIG/auxiliaries
run number 0
The display shows the selection of the run number as the
first inquiry.
As we have no further interest in this here, we can proceed
directly to the next inquiry.
ENTER
⇒
Press the
>CONFIG/auxiliaries
number of cycles 1
This display shows the selection of the number of cycles for
loop programs.
As this is yet another parameter which does not interest us
at present, we can proceed to the next inquiry.
ENTER
⇒
Press the
>CONFIG/auxiliaries
>CONFIG/aux/event
The display shows the submenu for EVENT settings, which
has not to be opened.
7
CONFIG
⇒
Press the
>CONFIG/auxiliaries
date 1995-09-11
The display now shows the inquiry regarding the current
date with the numeric data for year, month and day.
If the displayed date is the same as the current date, you
need only press the
However, if you wish to change this date, enter the new
numeric values in the order year – month – day using the
numeric keys, e.g.
"19
95-10-05
"
for October 5, 1995.
ENTER
⇒
Confirm the inputted date by pressing the
>CONFIG/auxiliaries
time 16:43:27
The current time with the numeric data for hours, minutes
and seconds appears in the display as the next inquiry.
If the displayed time matches the current time, you need
only press the