Metrohm 732 IC Detector - Manual (Page 71)

3 Operating tutorial
732 IC Detector / 733 IC Separation Center
64
3.6 Storing as a method
The parameter settings used for the drinking water determination can
be stored in the 732 IC Detector as a method and hence later recalled
at any time. Proceed as follows to store the inputted settings under the
name "Water":
METHOD
9
⇒ Press the key to open the main menu for
method management.
METHOD
>METHOD/recall
The title of the submenu " METHOD/recall " appears. This is
used to load a method already stored in the working mem-
ory. Proceed further to the next submenu.
METHOD
9
⇒ Press the key again.
METHOD
>METHOD/store
The title of the submenu " METHOD/store " appears. This is
used to store a method loaded in the working memory.
ENTER
⇒ Press the key.
>METHOD/store
name:
The inquiry for entry of the method name which can have a
length of max. 8 characters appears. The name "Water" se-
lected for this example is entered as follows:
- /+
⇒ Press the <è> key to start the text entry.
>METHOD/store
name: ABCDEFGH
The first 8 letters of the alphabet " ABCDEFGH " appear with
the first letter A flashing. The letter at the flashing position
can now be selected with the <ç> and <è> keys.
- /+
⇒ Press the <è> key repeatedly until the flashing letter " W "
appears.
>METHOD/store
name: WXYZ abc
The first letter of the name is now the desired " W " .
ENTER
⇒ Press the key to confirm the first letter.
>METHOD/store
name: WWXYZ ab
The second letter of the name starts to flash and can again
be selected with the <ç> and <è> keys.
- /+
⇒ Press the <è> key repeatedly until the letter " a " appears
at the flashing position.